My brother mfc-9330 printer will not scan to computer

My brother mfc 9330 printer will not scan to computer how to#
My brother mfc 9330 printer will not scan to computer install#
My brother mfc 9330 printer will not scan to computer driver#

Attempt to scan again to verify that the issue is resolved. NOTE: You cannot have more than one computer on the network using the same ID.Р вЂќР Р‹2. This ID will show up on the Brother Machine when you use the Scan To option. Enter in an ID for your computer under Display Name. Check Register your PC with the 'Scan To' functions at the machine.Р вЂќР Р‹0. The IP Address should match the machine's IP address found in the previous step or you can manually specify the machine's IP address.Р вЂќР’В©. Change the setting to Specify Your Machine By Address.

Contact your network admin or computer manufacturer for further support.Р вЂќР’В§. Try to eliminate as many of these applications and try browsing again. This may be caused by a firewall or other security program blocking communication. If the machine isn't found successfully, then there is no communication between the devices over the network. Highlight the search result and click OK. If the machine is found successfully, ensure the IP address matches the address of the Brother machine. The computer will search for the Brother machine.

My brother mfc 9330 printer will not scan to computer install#

You will need to install the Brother MFL-Pro software.Р вЂќР’В¦.

My brother mfc 9330 printer will not scan to computer driver#

NOTE : If the scanner driver is not listed, then this is the cause of your issue. Make sure the Brother scanner is selected and click PROPERTIES or right click on the Brother scanner and click PROPERTIES. Windows 8, 8.1 or 10: Go into Start =>Р вЂ™Р’В Brother utilities, scan then scanners and cameras.Р вЂќР’В¤. Windows 7 Users: Click Start => In the Search line type: Cameras => Click the link for View Scanners and Cameras. Windows Vista Users: Click Start => Control Panel => Hardware And Sound => Scanners And Cameras. Windows 2000/XP Users: C lick Start => (Settings) => Control Panel => Scanners And Cameras. Refer to your Network/Computer Admin or Router Manufacturer for support If you have no IP or IPv4 address, then the computer is not on the network.

My brother mfc 9330 printer will not scan to computer how to#

If you cannot determine how to disable the connections, refer to your Network/Computer Admin or Router Manufacturer for support. NOTE: If the computer has multiple network connections (two or more IP or IPv4 addresses), then you will need to disable all but one. You may have to scroll to see all IP addresses.

You should receive information about your computer's network connection.

Press the Windows and R keys on your computer keyboardР вЂ™Р’В at the same time.

Verify the computer's network connection:

NOTE: An invalid IP address would be all zeroes, an APIPA address (.x) on an Infrastructure network, or an address within an incorrect range for your network.Р вЂќРЎС›. If there IP address is not valid, then the machine will need to be connected to the network using the initial setup instructions.

Verify that the Brother machine has a valid IP address for your network.

The network configuration list will now print.

Press MENU, 4 (Print Reports), 6 (Network Config), START.

Note: You will need the Full driver and software package installed on the computer you are trying to scan to. Click here for information about required firewall ports. Once you are able to scan, re-enable the firewall to make sure it is not blocking the required network connection.

View All Brother Care Program Eligible ProductsР вЂќР’В«efore you begin, ensure all active firewalls are disabled.

View All Refurbished - Sewing & Crafting.

View All Refurbished - Fax Machines & Scanners.

My brother mfc-9330 printer will not scan to computer